GE Fanuc IC697MDL340H Series 90-70 Output Modul
Description
The IC697CMM742 Ethernet Interface (Type 2) provides high performance TCP/IP communications for the IC697 PLC.
The Ethernet Interface (Type 2) plugs into a single slot in an IC697 PLC rack and is configured with the IC641 PLC programming software. Up to four Ethernet Interface (Type 2) modules can be installed in an IC697 PLC CPU rack.
The Ethernet Interface (Type 2) contains three network ports: 10BaseT (RJ-45 connector), 10Base2 (BNC connector), and AUI (15-pin D-connector). The Ethernet Interface automatically selects the network port in use. One network port may be used at a time.
The 10BaseT network port permits direct connection to a 10BaseT (twisted pair) network hub or repeater without an external transceiver.
The 10Base2 network port permits direct connection to a 10Base2 (ThinWire) network without an external transceiver.
GE Fanuc In Stock
| 531X309SPCAJG1 | IS200EXHSG3AEB | IC200MDL640K |
| IS200SPIDG1ABA | DS200DCFBG2BNC | IC200ALG320H |
| IS215ACLEH1A | DS3800NOAA1F1D | IC698CPE010-CC |
| IC200MDL740 | IS200STTCH2A | IC695ACC402 |
| IC200ALG620 | 3720 ACM | 531X305NTBAPG1 |
| IC200CHS002F | IC697MEM715 | IC697MDL240 |
| IC693MDL752 | 369-HI-R-0-0-0-E | IS200EMCSG1AA |
| 531X128HMSADG1 | IC695RMX128 | GE IS200AEPAH1BKE |
| IS200TGENH1A | IC693CHS397L | IC693MDR390 |
| IC698CPE020 | IS200WETBJ1ABA | NP 104X905BA603 NP104X905BA603 |
See Other Products
| HIMA | yokogawa | Honeywell |
| F4111A | SB401-10 S1 | 51304501-100 |
| F3421 | EB401 | MU-TAIH13 |
| K9203 Module | AAV544-S00 | 8U-PAIHA1 |
| F3331 | AMM12C | MC-PAIH03 |
| F3237 | AAT145-S00 | 51199406-100 |
| F8650 | F9342BF | 900R08R-0101 |
| F7553 | F9900RR | 8C-TDILB1 |
| K9203A | F9340GN | 51454416-400 |
| F8650E | SR1220E2 | 51202971-302 |
| Z7127 | AFS30S AFS30D | TSAI-1620M |
| F8628X | PW482-10 S2 | 51304418-100 |
| F8621A | SB401 | 51402755-100 |
| BV7046-4 | AAI543-H00 S1 | MC-GAIH83 |
