General ElectricIC200MDL241 Module New In Stock

Description

Ordinarily, a VersaMax PLC system is configured by creating a configuration file on the programmer (computer), then transferring the file from the programmer to the PLC CPU via the CPU port. The CPU stores the configuration file in its nonvolatile RAM memory. The configuration is stored whether I/O scanning is enabled or not. After the configuration is stored, I/O scanning is enabled or disabled according to the newly-stored configuration parameters. Autoconfiguration and Storing a Configuration Clearing a configuration from the programmer causes a new autoconfiguration to be generated. Autoconfiguration remains enabled until the configuration is stored from the programmer again. Storing a configuration disables autoconfiguration. Storing a Configuration with Non-default Memory Allocation If you reconfigure reference tables from the default sizes, storing a hardware configuration to the PLC in the future will clear memory contents. If you want to retain memory contents, first load reference memory contents from the PLC to the programmer. Then, re-store reference memory when you store the hardware configuration from the programmer to the PLC. Default Serial Port Parameters When a programmer is first connected, the PLC communicates using the default communications parameters: 19,200 baud, odd parity, one start bit, one stop bit, and eight data bits. If these parameters are re-configured, the new settings will be used at powerup instead. Serial Port Configuration Takes Effect After Removing Programmer If a hardware configuration is stored to the CPU, the configuration for the serial port to which the programmer is connected is not actually installed until the programmer is removed. After removal of the programmer, there is a delay before the new protocol begins operating. This delay is equal to the configured T3’ time.

GE Main series

1. IC200series Versamax: IC200ALG322 | IC200CHS002 | IC200PWR102 | IC200CPU001

2. IC693series:IC693MDL730 Module |IC693CPU311(323,331..363,374) |IC693ALG392 | IC693CBL300 Cable

3. IC694series:IC694APU300 | IC694BEM331 | IC694MDL740

4. IC695series: IC695CPU310 | IC695CHS007| IC695ACC402| IC695LRE001 |IC695CPE310

5. IC697series:IC697BEM733 |IC697CHS750 Rack, Chassis|IC697CMM711|IC697CPU731 (772,780)

6. IC698 serise: IC698CPE010 | IC698CPE020| IC698CRE030| IC698PSA100| IC698RMX016 | IC698ETM001 | IC698CPE030

7. Relay module: SR469-P5-HI-A20 |369-HI-R-M-0-0-0-E

8. Gas turbine card:IS200VCRCH1BBB | IS200EMCSG1AA|IS215VAMBH1A|DS200CTBAG1ADD|DS3800HCMC1A1B

Feel free to contact us

lNew Low Price!

lIf you have any question or need any help,please contact me DIRECTLY.i will do what i can to help you.

lWe believe our products are excellent. We trust you will be satisfied with your purchase.

lWhen you are satisfied with our products and services, please give us positive feedback.

lIf there is a problem, please contact us immediately through any email request.

Other Parts In Stock

1. ABB(DSQC, AC800M,OCS 07KT97/07AI/07DI,PM645,etc)

2. BENTLY(3500,3300 system sereis)

3. HONEYWELL(DC 2000, TDC3000, TPS, security systems)

4. SCHNEIDER(Quantum 140series: CPU processor, communication module)

5. FOXBORO(FBM203/204/217,FCP240/270)

6. EMERSON(DeltaVsystems,/ O unit, Analog AI module, Analog AO module)

7. YOKOGAWA(CS3000system CPU controller module, analog module)

8. EPRO(MMS6210/621,PR6423/003-031..)

9. Rosemount(pressure transmitter, flow meter..)

Other Products