Honeywell 8C-PCIW02 51454363-275 Brand New

Introduction

In the Safety Manager Guides an approved basic Fire and Gas Safety application is included. This application provides a Fire and Gas Safety Solution that can easily be integrated into Honeywell’s Experion™ PKS, Honeywell’s TotalPlant Solution (TPS) system or into Honeywell’s PlantScape system. The basic application can be developed and adjusted easily to design a project specific Fire and Gas Safety Solution. The integrated layer of the F&G solution within Experion, TPS or PlantScape contains the integrated alarm listing and safety historian functionality that records all detected alarms, all actions initiated by the F&G Safety system and all actions executed by this system or connected integrated sub-systems. This layer also shows the actual situation of the F&G application by using overall plant displays and various detailed area displays that contain locations and actual status of all connected F&G field detectors

Honeywell Safety Manager™ provides an approved Fire and Gas Safety Solution that covers Safety Instrumented System requirements as part of the Mitigation Safety Layer described in the IEC 61508, IEC 61511 and ANSI/ISA S84.01 standards. Safety Manager fire and gas safety system is designed to detect hazards like fires or gas leakage’s in a fast and accurate way by using connections of a wide range of F&G detector devices. On detection system will perform the appropriate safety actions automatically and will alert about the detected hazard(s) in most efficient way. Safety Manager supports standard connection of Fire and Gas detector devices of most major F&G field device suppliers. The supported connections are proven in use and/or are fully tested as part of the MVIP test program. For signal handling inside Safety Manager of these connected F&G devices, special function blocks are developed to create an optimum response from these devices. For connection of the devices special interfaces are developed to achieve the optimum connection.

Related Honeywell PLC modules

Honeywell RHMUX Remote FTA MC-GRMT01
Honeywell Digital Output 120/240 Vac Solid-State FTA MU-TDOA13 MC-TDOA13
Honeywell Digital Output 3-30 Vdc Solid-State FTA MU-TDOD13 MC-TDOD13
Honeywell Digital Output 3-30 Vdc Solid-State FTA MU-TDOD14 MC-TDOD14
Honeywell Digital Output 31-200 Vdc Solid-State MU-TDOD23 MC-TDOD23
Honeywell Digital Output 24 Vdc, 100 ma Nonisolated FTA MU-TDON12 MC-TDON12
Honeywell Digital Output 120 Vac/125 Vdc Relay FTA MU-TDOR12 MC-TDOR12
Honeywell Digital Output 240 Vac/125 Vdc Relay FTA MU-TDOR22 MC-TDOR22
Honeywell Digital Output 24 Vdc FTA MU-PDOY22 MU-TDOY22 MC-TDOY22
Honeywell Digital Output Relay FTA MU-PDOY22 MU-TDOY23 MC-TDOY23

You May Be Interested In