MC-TDID72 51303928-150Honeywell One Year Warranty Brand New

Introduction

This Safety Manager architecture has a redundant Controller and redundant input and output (IO) modules (OR function outputs) (see Figure 17 and Figure 18 below). The IO modules are controlled via the IO bus drivers (located in the QPP) and the IO Bus, which can control up to 8 IO chassis per cabinet. Each IO chassis is controlled via the IO Extender. The processor and IO are fully redundant, which allows continuous operation and smooth (zero-delay) transfer of the control in case of a Control Processor or IO failure. This architecture can be applied up to and including SIL3. Interaction between Control Processors Both Control Processors run in parallel, meaning that they simultaneously read input states and write output states. Via the redundant link both Control Processor’s continuously inform each other about the achieved IO states, application states. The redundant link is used to synchronize activities and compare results.

Our Advantage

ICS Triplex T8461,ICS Triplex T8311,ICS Triplex T8431,ICS Trusted Triplex T8310
All Yokogawa CP401-10,SCP461-51,Yokogawa CP451-10,ALR121-S50 Are Availabe
We Also Sell Emerson DeltaV EPRO Yokogawa Products,Call US Now.

Advantage Products

①Allen-Bradley(USA AB)Series

②Schneider(Schneider Electric)Series

③General electric(General Electric)Series

④Westinghouse Series

⑤SIEMENS Series

⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots.

⑦Westinghouse: OVATION System、WDPF System、MAX1000 system spare parts.

Conversion、I/O Signal processing、Data communication systems?Digital-to-Analogue

⑧Invensys Foxboro I/A Series system，FBM（I/O）SCS、Trapezoidal logic control、Accident recalling、DAC

Invensys Triconex: Redundant fault-tolerant control system、Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture.

⑨Siemens：Siemens MOORE，?Siemens Simatic C1，Siemens CNC system.

Original And New