Fuji NP1AXH8VG-MRModule New Low Price
Description
Like other spraygun manufacturers, we use ‘stock’ stainless steel rod for the needle. This rod can differ in diameter slightly with each run. This means that when you change say, a #3 for a #4 needle. One could be slightly oversized diameter and one slightly undersized. This neccessitates adjusting the needle seal. The needle seal bushing (packing) must be tight enough to prevent any leakage of paint material into the gun. It should however, allow the needle to glide smoothly through it. If this bushing is too loose often a ‘pulsating’ of the spray pattern will be seen.
Insert the needle seal adjusting tool (with teeth pointing downwards) over the needle. This is the tubular-shaped tool that comes with the complete Fuji system. Locate the slots in the needle seal nut and tighten the needle seal while continually pulling the trigger. (If the slots are clogged with paint, use a sharp screwdriver to clean out the slots). Once the needle is grabbed by the seal, back off the screw a very slight amount. The needle seal is adjusted perfectly just short of the point where the needle sticks. Another guide is to grasp the end of the needle and shake it firmly but gently from side to side - there should be no play - but the needle should still slide smoothly without sticking when the trigger is pulled. The needle seal should never need replacing.
Fuji Products
| NC1X3204 | NP1PU-128EZM | FTU123B |
| FTU110B | FTU500A | NR1DY-16T05DT |
| NP1L-JP1 | NJ-HC | NC1F-VP1 |
| NP1L-PE1 | NP4N-ITGR | NP4N-IPAC |
| NP1L-UC1 | FTU113B | FTK500A-C10 |
| NR1JX-1606DT | CHBAPWM05-102 | NP1PM-48R |
| FTU211B | NR1DW-16T65DT | NP1AYH8V-MR |
| NP1S-91/81 | NC1H-TL1 | NV1X1604-W |
| NP1S-22 | NC1Y32T05P1 | NR1DY-08R07DT |
| NP4H-SEDBV3 | NV1L-TL1 | NP1Y08U0902 |
| NP1AWH6-MR | NP1L-RP1 | NP1Y64T09P1 |
| NP3PS-SX1PCS74 | Y16-SF1 | NP1PS-16 |
| NP1BS-06 | NR1LY-08R07DT | NP3L-FL3PCS |
You May Like
| Emerson | ICS Triplex | Ovation |
| KJ2201X1-BA1 | T8193 | 5X00167G01 |
| VE4006P2 KJ3241X1-BA1 12P2506X062 | T9852 | IC31224G01 |
| VE4006P2 KJ3241X1-BA1 | T9832 | DETECTION |
| VE4005S2B2 KJ3221X1-BA1 12P2531X092 | T9802 | 7379A21G02 |
| VE4003S5B1 KJ3002X1-BG2 12P1731X082 | T9451 | 7379A21G01 |
| VE4003S2B1 12P3270X022 | T9432 | 5X00790G01 |
| VE4002S1T2B5 KJ3204X1-BA1 12P3275X022 | T9402 | 5X00717G01 |
| VE4002S1T2B4 KJ3202X1-BA1 12P2536X042 | T9300 | 5X00658G01 |
| VE4002S1T2B2 KJ3202X1-BA1 12P2536X032 | T9110 | 5X00489G01 |
| VE4002S1T1B2 KJ3001X1-BG1 12P0557X162 | T9100 | 5X00481G01 |
| VE4001S2T2B4 | T8903 | 5X00419G02 |
Advantage Products
1.Allen-Bradley 1756/1769/1771/1785 Series
2.ABB 800xA/Bailey INFI90/DSQC Series
3.Bently Nevada 3500/3300 Monitoring System
4.Schneider Series Quantum 140 series
5.General Electric IC693/IC697/IC698/IS200/DS200 Series
6.SIEMENS MOORE/S5 Series
7.Westinghouse: OVATION/WDPF/MAX1000 system spare parts
8.Invensys Triconex: Redundant fault-tolerant control system, Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture
9.Honeywell TDC2000/TDC3000/Experion HS Series
10.YOKOGAWA CS3000 System
