Foxboro P0916AG 0-20mA Compression Terminal Base DIN Mount NOS

Test Mode

The Test mode provides a way to check the operation and calibration of the transmitter. Details of using this function are covered in System Maintenance Instruction, MI 021-391. To use Test mode, you must have an IMTSIM flowtube simulator to connect to the transmitter in place of the flowtube. Test mode provides three choices:

-OFF returns the transmitter to normal operation

- Test Mode A (See test description below)

-Test Mode B (See test description below)

In both test modes, the display initially shows the word “Testing” for about a minute while it performs internal checks. It then displays a mV/Amp value that should equal the dial setting on the IMTSIM. When this value stops flashing, it has stabilized and is ready to read. The differences between Modes A and B relate to the 4 to 20 mA and pulse rate outputs. Mode B sets the outputs to 100% for the maximum IMTSIM setting, which is 8 mA. This makes it easy to compute the correct output percentages for the other dial settings. Since Mode A does not alter the ranging of the transmitter, the dial settings must be calculated using the flowtube factor and URV settings. When the transmitter exits from Test mode and returns to normal operation, the configuration that existed before testing is restored.

FAQ:

1.Is the part new?
Yes, 100% Original brand new

2.How is the package?
Original factory seal packed

3.What is the lead time?
In stock: 1-3 working days

4.What is the MOQ:
1pcs

5.What is the payment term:
TT and Western Union, other negotiable

6.Where the item ship from?

Xiamen

7.What is the warranty time?
One year

8. How to delivery the PLC Parts?
Kindly tell us your address,we check best cost for you
Or you can use your own courier account or agent, DHL, FEDEX, UPS etc are available.

More Products