Foxboro FBM211 0-20mA Int Source 16 INPUT

Description

Your transmitter has been preconfigured at the factory to the settings shown in Appendix B. Compare your needs to the factory configuration and note the changes to the configuration you must make. If the transmitter is not connected to a flowtube or IMTSIM, it is necessary to put a jumper wire between terminals Coil 1 and Coil 2 and also to provide power to the transmitter. This section describes the procedures to quick start the transmitter from the optional local keypad/display. Note that after you quick start the transmitter from the local keypad, you should use the fieldbus host to ensure that parameter values associated with the host are changed to agree with those changed from the local keypad/display. Otherwise, mismatch errors occur when you attempt to place the transmitter into Auto mode.

The Top Level menu displays the following modes – Measurements, Status, Identity, Quick Start (in FoxCom and HART transmitters), Test Mode, and Setup. You can switch from one to another in sequence by using the Up/Down arrow keys. To enter the second level menu from a particular top level screen, press the Right arrow key. To return to the top level from a second level menu item, press the Left arrow key. The level of the first, second, third, and fourth level menus is indicated by the digit appearing as the first character in Line 1 of the display; a 1 indicates Level 1 (Top Level), a 2 indicates Level 2, and a 3 indicates Level 3, etc. The top level menu is shown in Figure 3. For a complete presentation of all menu structures, refer to Appendix A.

FAQ:

1.Is the part new?
Yes, 100% Original brand new

2.How is the package?
Original factory seal packed

3.What is the lead time?
In stock: 1-3 working days

4.What is the MOQ:
1pcs

5.What is the payment term:
TT and Western Union, other negotiable

6.Where the item ship from?
Xiamen

7.What is the warranty time?
One year

8. How to delivery the PLC Parts?
Kindly tell us your address,we check best cost for you
Or you can use your own courier account or agent, DHL, FEDEX, UPS etc are available.

About Us

Servo module Parts Limitedfor many years, is a professional engaged in large-scale system (distributed control system, programmable controller, redundant fault-tolerant control systems, robot control system, large servo control system is the central feeding system plastic molding auxiliary equipment and automation of whole plant planning) imported automation system such as spare parts, modules, sales and system integration of high-tech enterprises. The company is equipped with professional technicians to provide customers with better service.

More Products