KJ4001X1-BE1 8 Wide I/O Carrier with Shield Bar

System Identifier

The System Identifier, shipped in the License Pack, is a connector that plugs into the parallel printer port or Universal Serial Bus (USB) on the ProfessionalPLUS workstation. It gives each DeltaV system a unique identification that allows you to download changes to the system. Install the System Identifier on the ProfessionalPLUS workstation before you power up your system. DeltaV systems may be engineered and configured using a Development System Identifier prior to going online. DeltaV systems used for training or simulation may use a Multi-Node Simulate System Identifier. Development and Multi-Node Simulate System Identifiers cannot be used for online, running systems. Only a User System Identifier can be used with an online system. Refer to the Knowledge Base for information on converting a system based on a Development or Multi-Node System Identifier to one based on a User System Identifier.

Hardware

The manual, Installing Your DeltaV Digital Automation System, also available as an online book, describes the DeltaV system hardware and provides instructions for installing and powering up the system.

You Magbe Interested In