100% New Module Emerson PR6423/011-000 Epro
Description
The DeltaV Control Network is a standard Ethernet network interconnecting the DeltaV workstations and the controllers. The Control Network is a dualspeed 10/100BaseT network. CAT 5 screened (ScTP) twisted-pair cable connects each node to the hub or switch.
LocalBus that consists of an internal power bus on the Power Controller Carrier, busses on the associated I/O interface carriers, and connecting cables. The LocalBus supplies power to the controller and the I/O subsystem and provides communications connections between cards. System power (12 VDC) can be shared along the length of the LocalBus. The length of the LocalBus, including all cabling, cannot exceed 6.5 m (21.3 ft.) as shown in the following figure. The length requirement is the same for vertically mounted systems.
The DeltaV system scales in both size and functionality. It’s the first fully digital system to offer you a single architecture with full functionality ranging from 8 I/O up to 30,000 I/O.
Main Products
| A6210 | A6410 | MMS6822 |
| CON041 PR6423/002-011 9200-00021N | MMS6350 | PR6423/002-001 CON041 |
| PR6423/004-030 CON021 | A6220 | PR6423/002-000 CON021 |
| PR6423/003-030 CON021 | MMS6418 | PR6423/015-030 CON021 |
| PR6423/010-010 CON021 | PR6423/002-040 CON041 | MMS6110 |
| MMS6250 | PR6424/010-010 CON021 | PR6423/10R-040 CON021 |
| PR6423/004-010 | PR6423/00R-010 CON021 | PR6424/006-010 |
| PR6423/009-010-CN CON021 | PR6423/101-101 CON031 | CON021 PR6423/002-000 9200-00006N |
| A6120 | PR6424/010-000 CON011 | PR6423/10R-030-CN CON021 |
| PR6423/00B-030-CN CON021 | PR6424/000-030 CON021 | UES815S |
| MMS3120/022-100 | MMS6410 | MMS6210 |
| MMS6312 | PR6423/018-010 CON021 | PR6423/013-000-CN |
| MMS6120 | PR6423/005-031-CN CON041-CN | PR6423/002-030 CON021 |
| PR6424/000-010 CON021 | PR6423/00R-101 CON031 | PR9350/02 |
You May Like
| Yokogawa | Bently Nevada | Siemens |
| AAI143-H00/K4A00 | 3500/42 | 16267-1/4 |
| YS170-012 S4 | 102351-04-01 | 146659-069 |
| YNT512D-Q12 | 102550-01 | 15377-4FM |
| YHC4150X-01 YHC4150X | 125388-01 | 15738-119 |
| Y9612YU | 125388-01 125388-01H | 16135-21-2 |
| VI702 S1 | 125704-01 | 16147-51-2 |
| VI702 | 125720-01 | 16168-1-1 |
| VI701 S1 | 125720-02 | 16180-500 PSMBXNAN |
| VI701 | 125736-01 | 16182-1-3 |
| VI451-10 S2 | 125760-01 | 16187-1-1 |
| VF702 | 125768-01 | 16249-51-4 |
| VF701 VF701 S3 | 125800-01 | 16267-1-2 |
Advantage Products
①Allen-Bradley(USA AB)Series
②Schneider(Schneider Electric)Series
③General electric(General Electric)Series
④Westinghouse Series
⑤SIEMENS Series
⑥ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robot
⑦Westinghouse：OVATION System、WDPF System、MAX1000 system spare part
Conversion、I/O Signal processing、Data communication systems Digital-to-Analogue
⑧Invensys Foxboro I/A Series system，FBM（I/O）SCS、Trapezoidal logic control、Accident recalling、DAC
Invensys Triconex: Redundant fault-tolerant control system、Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture
⑨Siemens：Siemens MOORE，Siemens Simatic C1，Siemens CNC system
⑩Bosch Rexroth：Indramat，I/O module,PLC controller, Driver Module
About Epro Germany
Epro was founded in Gronau, Germany in 1970. Its predecessor was Dutch Signal Equipment Co., LTD., which was then a factory owned by the PHILIPS group in Europe.
In 1992, the company became ePRO Electronic Systems Co., LTD.
Epro company in 1994 in the wave of Philips group reorganization merger and Philips steam turbine monitoring protection division, and inherits the Philips company in the field of rotating machinery protection accumulated decades of experience and well-equipped production facilities, and Philips, cultivate many years of senior experts and sales and after-sales service network all over the world.
In 1995, EPro incorporated AEG's rotating machinery protection division, increasing the company's technical strength.
Since 1997 and 1998, EPRO has introduced the most advanced rotating machinery monitoring system, MMS6000, on the basis of Philips RMS-700 turbine monitoring and protection system.
As a professional manufacturer of rotating machinery monitoring and protection systems, its products are widely used in the world.
Its reliable quality, stable performance has gained the user's trust. In China, the market performance has also developed from the initial 18 RMS700 systems introduced by the Power Department to nearly a thousand MMS6000 systems in operation throughout the country today, from millions to 50,000 small units, from nuclear island main equipment to conventional thermal power main steam turbine, and various auxiliary machines with successful experience in using MMS6000 systems.
