Bently Nevada 125736-01 Module Brand New

Description

Independent of System 1 Condition Monitoring and Diagnostics software, the 3500 System can provide multiple measurements from each transducer channel. For example, in addition to direct (unfiltered) vibration amplitude for a radial proximity probe channel, the 3500 monitor can return gap voltage, 1X amplitude and phase, 2X amplitude and phase, NOT 1X amplitude, and Smax amplitude (when XY transducers are present). Thus, a single radial vibration channel can return 8 conditioned parameters (measured variables) for a total of 32 in a single 4-channel monitor module. This is particularly valuable when machinery protection strategies require alarms on these measured variables. Activation or use of these values has no impact on rack density, and does not consume additional channels in the monitor..

BentleyNevada 3500 Series Modules

Bently Nevada 3500/05, 3500/06,3500/08,3500/15,3500/20,3500/22M ,3500/25,3500/32,3500/33,3500/34,3500/40M,3500/42,3500/65 184469-01,3500/44M, 3500/45, 3500/46, 3500/50, 3500/53, 3500/60, 3500/61, 3500/62, 3500/64M, 3500/65, 3500/70M, 3500/60, 3500/65,3500/72M,3500/77M, 3500/90, 3500/33, 3500/33 149992-01, 3500/33 149986-01, 3500/53, 3500/53 133388-01, 3500/53 133396-01,3500/65 184522-01, 3500/92, 3500/92 136180-01, 3500/92(136180-01), 3500/15 125840-01, 3500/15 133300-01, 3500/15 127610-01

Ordering Information

The 3500/33 requires 3500 Rack Configuration software, version 3.3 or later

The 3500/33 requires 3500 Data Acquisition software, version 2.40 or later

The 3500/33 requires 3500 Data Display software, version 1.40 or later

When used with a 3500/93 LCD Display module, the 3500/93 will require firmware revision P or later.

When used with a 3500/94 VGA Display module, the 3500/94 will require firmware revision C or later

You May Be Wnat To Buy